Original Crankshaft Position Sensor for KIA CERATO Saloon, RIO II CEE'D SW CKP SENSOR

39180-2A100, 39180-2A200

* Car Maker: HYUNDAI/KIA

* OEM Ref.#

391802A100/391802A200/39180-2A100/39180-2A200

* Offer:

CRANKSHAFT POSITION SENSOR (CKP SENSOR) FOR

AUDI/VW/SEAT/SKODA/FORD/RENAULT/NISSAN/OPEL/SUZUKI/BMW/MAZDA/VOLVO/FIAT/ALFA ROMEO/CITROEN/PEUGEOT/KIA/HYUNDAI/DAEWOO/CHEVROLET/MERCEDES-BENZ/GM

MITSUBISHI/HONDA/LAND ROVER/GENERAL MOTORS……MORE MODELS ARE AVAILABLE, PLEASE CONTACT US FOR FURTHER INFORMATION. PRODUCTS CATALOGUE AND TESTING SAMPLES COULD BE SENT ON REQUEST.

* APPLICATION

* FEATURES:

Camshaft and Crankshaft Position Sensor

Tips 1: What does a Camshaft/Crankshaft Position Sensor do?

The Camshaft sensor determines which cylinder is firing to establish injector synchronization and coil firing
sequence in DIS systems. Crankshaft sensors set ignition timing, supply the RPM signal, and determine
engine speed.

Tips 2: Where are these sensors located?

The Camshaft Position sensor is typically located in the cylinder head of the engine and has a cylindrical
portion that inserts into the head. The Crankshaft Position sensor is normally located in the timing cover or
on the side of the block with a cylindrical portion that inserts into the block.

Tips 3: Will a malfunctioning Cam or Crank Sensor illuminate the check engine light or
affect vehicle operation?

Yes, a failing sensor can illuminate the MIL, and may cause vehicle stalling or a no-start condition.

Tips 4: What are the common causes of failure?

Typically these sensors fail due to exposure to high heat.

Tips 5: How to determine if these sensors are malfunctioning?

Look for RPM on a scan tool while cranking the engine. If the engine runs, a scope is the best diagnostic tool.
Typical trouble codes: Crankshaft P0335; Camshaft P0340.

* PRODUCT DISPLAY: